S-CH/S
 |
Continuous crimpsealer.
Continuous process for highest throughput. |
| |
| MEYPACK offers continuous band sealers in a wide variety of performance ranges for safe hermetically tight closures of plastic sacks. The perfectly homogenous sealing with heater bars and continuously moving bands is done under pressure. (System DOBOY) On machines with water cooling the sealing seams are cooled down under pressure between the steel bands. This gives incomparible smooth seams. Further optional equipment fits the machine to difficult applications, e.g. dusty filling goods. |
|
Operation: The bag closing machines from the S-CH/S series close paper bags with a heat sensitibe inner PE coating using the Doboy continuous band sealing principle. The heating sections of S-CH/S machines consist of heater bars with automatic temperature control. This guarantees the most efficient heat transfer.
Heavy duty carrier chains running synchronously immediately below the steel bands grip the bag top and maintain control through the entire machine. At the same time the sack is supported by a conveyor (additional equipment). The heating section consistst of heater bars, the number depending on machine type and required output. The automatic temperature control of the heater bars enables the user to run the machine constantly with a sealing process perfectly set to the bag specification. After heat sealing the sack passes crimp pressure rollers. |
|
Machine data |
|
Model |
Heating
section mm |
Capacity
bags/min. |
P- drive
kW |
P-heating
kW |
L x W x H |
|
L
mm |
W
mm |
H
mm |
|
S-CH/S-2H |
2x200 |
20 (--) |
0,55 |
1,8 |
2025 |
1078 |
1910 |
|
S-CH/S-4H |
4x200 |
45 (30) |
0,55 |
3,6 |
2550 |
1045 |
1910 |
|
S-CH/S-5H |
5x200 |
60 (35) |
0,55 |
4,5 |
2810 |
1045 |
1910 |
|
S-CH/S-10H |
10x200 |
90 (70) |
1,1 |
9 |
4110 |
1045 |
1910 | |
|
Figures for SOS type paper bags with 2 layers of 70g / m² paper and PE inner coating of 30 µm, 200 mm wide bags without handles. |
|
Features :
Rugged design for multi shift operation.
High heat efficiency due to spring loaded heater bars.
Simple operation and maintenance due to good accessibility.
A minimum of change over time is required for varying bag dimensions.
Compatible with any common open mouth sack feeding system |
|
Available options:
- bag top trimmer
- cleaning station
- water cooling bars
- Emboss coder unit
- ink coding unit
- electromotive height elevating device
- water refrigeration unit
- direction of feed from left to right.
- Eex specification.
| |
| |
|
Other versions available upon request. |
| |
|
| |
|
Home
